Calibrate a FACTS Touchscreen

The FACTS 2001 Family Control Systems are located across the United States and the world. Use this handy guide to troubleshoot your touch screen. Via Touchscreen If the touchscreen is working well enough to navigate through the SubMenu, the calibration can be initiated here. If not, skip down below to see Keyboard instructions. Select Submenu 1 Select System Service Menu Enter password if needed. Select Touch Screen... --more

.
Comments OffPosted in Category Customer Support

On-Cal Gauge Calibration Procedure

(For a more detailed Calibration Procedure please refer to Chapter 14 of the FACTS 2001FS Manual.) Clean all debris from the Roller assembly wheels. Clean all debris from the Gauging roll surface. Put the gauges down on a bare roll. Zero the gauge reading via the main FACTS screen using the Zero Button. NOTE: This function automatically loads a new offset factor to make the gauges read zero. Determine the input... --more

.
Comments OffPosted in Category Process Control